|Home||» Products||» Ceramic Infrared Heaters||» Elstein IRS Rod Heaters|
Elstein IRS Rod Heaters
IRS series heaters have one mounting socket on each side, with which they can be fixed to a mounting profile with fixing springs.
The rod shaped design makes IRS heaters preferably suitable for linear heating tasks.
An example for linear heating tasks can be found in the timber industry, where IRS rod heaters are used to pre-heat edge strips.
Elstein IRS rod radiators are available in two designs and cover the power range from 200 W to 600 W.
Technical Details :
|Type // Weight g // Wattage W||IRS||95||400||600|
|Typical operating temperature||°C||550||650|
|Maximum permissible temperature||°C||750||750|
|Wavelength range||µm||2 - 10|
Further Information :
|Standard Design||Thermocouple Heater||Variants|
|operating voltage 230 V||integrated thermocouple type K (NiCr-Ni)||special wattages|
|leads 60 mm||description T-IRS // T-IRS/2||special voltages|
|two mounting sockets||TC leads 100 mm||extended leads|
|two fixing springs||power leads with ring terminals|
The power can be controlled by using thermocouple heaters with TRD temperature controllers, TSE thyristor switching units and other accessories.
IR radiation panels can be assembled using mounting profiles MPO.
The national safety regulations must be complied with for the respective application, for example, the IEC or EN standard 60519-1, Safety in electrical heating installations.
Further information and safety instructions are mentioned in the mounting sheet, which is attached to each heater.